IAC Hand Crank Height Adjustable Workbench 30”D x 60”W (930 Series with MTS-II)

The IAC  hand crank hydraulic adjustable height workstation (930 Series)Bundle 11 comes with IAC's heavy duty Multi-Task System II (MTS-II), a two (2) slotted post upright system, preconfigured with an overhead light, tool trolley, electrical channel, bin panel and utility shelf. The MTS-II offers endless configurations up and down the slotted upright posts and has a load capacity of 250 lbs. Adjust the overall height of your work bench with this systems hydraulic hand crank - with a 12-inch adjustment range, from 30" to 42". Choose the standard 1-1/4" thick laminate worksurface top (made from 1-3/16" commercial grade particle board) or upgrade to an ESD top for electronics work. This bench has a 1000 lbs. max load capacity, 500 lbs. load during adjustment and 750 lbs. capacity at the stations highest adjustment. Expand your IAC 930 workbench by adding additional shelves, drawers and cabinets, and CPU holder. All IAC products are manufactured and assembled in the USA.

This adjustable height bench legs are aluminum with a silver coating. Your color choice applied to the bench frame and beams. 

More details

View All Associated Products

$2,235.35

-5%

$2,353.00

Add to wishlist

Accessories

Features

Fast ShipCall for current lead times – (800) 989-1422
Worksurface/Bench Top SpecificationsIAC 1-1/4” Total thickness constructed of 1-3/16” Commercial Grade Particle Board Core including 180° Rolled Front Edge and fully inserted for easy assembly and retrofit
Available in ESDYes
ESD Worksurface/Bench TopIAC ESD Properties are tested and results are logged at the manufacturer. ESD tops are shipped with 2 stainless steel ground bolts, 1 at each rear corner of the top and include a 10’ ground cord
Weight/Load CapacitySupports 750 lbs. evenly distributed static load
Available Depth30 inches
Available Length60 inches
Bench Top/Worksurface Height12-inch adjustment range, from 30 to 42 inch worksurface height
Upright TypeHeavy Gauge Steel double slotted , 1 inch increments
Number of UprightsTwo (left and right)
Upright Height48 inches (from worksurface to top of channel)
Height Adjustment TypeHand Crank – Manual
Drawer Specifications6 inches high x 18 inches deep x 15 inches wide
Drawer Locks IncludedNo - See part number QS-1050033
Light Fixture support Structure Available Length60 inches
Length of Light48 inches
Type of LightAccepts (2) T8 tube with prismatic diffuser (tubes not included)
Electrical Channel Length60 inches
# of Outlets(4) 15-amp, 60-Hz duplexes, w/included circuit breaker
Electrical Channel Mounts ToMTS-2 Uprights
CertificationsANSI/BIFMA

More info

Available Size  30"D x 60"L ONLY

This workstation is hand crank hydraulic adjustable height with 12-inches of adjustment range, from 30" to 42" – allowing for sitting or standing position no matter the operator height. A cantilever support system, housing the hydraulic lifters, provides maximum leg room, while the bolted steel channel frame delivers a range of 1500 lbs. when fully lowered, 500 lbs. when adjusting and 750 lbs. at mid height evenly-distributed load capacity – ANSI/BIFMA rated and certified. Choose accessories such as slotted vertical supports for shelving and lighting, drawers, electrical and shelving that adjusts up and down in unison with worksurface. Height adjustment is manually controlled by a rotating hand crank positioned not he right or left side under the worksurface support frame, the handle folds out of the way when not in use

This adjustable height bench legs are aluminum with a silver coating. Your color choice applied to the bench frame and beams.

Pro Series Frame:

This bench series has a welded steel frame, finished in a choice of durable, baked-on powder-coat paint, manufactured with a traditional cantilever design eliminating front support legs to provide unobstructed movement and greater leg comfort. 

Hydraulic heavy gauge slide system actuated by a hand crank or motor moves the worksurface by 2” increments (whether manual hand crank or electric motorized) from 30” to 42”. The pedestal leg construction is heavy gauge high grade aluminum with heavy gauge 2” by 3” tube pedestal top supports and 2” by 3” tube bases (including adjustable floor glides to support leveling actions). The lower half pedestal slides into the upper half pedestal for easy height adjustment, with 2 bolts per pedestal providing sturdy support. 

The heavy gauge C-Channel support beam is 1.5” high and pre-inserted for easy attachment of suspended drawers and cabinets. Extra support is provided by an 18” high heavy gauge rear panel.

Multi-Task Frame System II (MTS-II)


The MTS-II System is designed to enable operators easy configuration, and reconfiguration, of full-bench-length above the worksurface storage, tool management, lighting and electrical services. MTS-II consists of two (2) 48” high slotted vertical posts mounted to a support panel and bracket kit that is attached to the underside of the worksurface (this two post slotted system is unique to IAC Industries); dimensions are heavy (12) gauge double slotted, 2” wide x 1-7/8” deep slotted vertical posts. These slotted vertical posts are stabilized at their tops with a full length tie beam for enhanced rigidity. 

These uprights are mounted using C-clamp bases, 3/16” steel plate, bolted to the underside of the worksurface with brackets which provide secure fastening to the worksurface; each positioned at each corner of the bench. These slotted vertical posts accept a wide variety of accessories such as shelves, electrical channels, and lighting and computer accessory swing arms. Each accessory can be positioned up and down the 48” high vertical upright at 1” increments. The maximum load capacity for the MTS frame is 250 lbs. with no more than 50 lbs. above the center of the slotted vertical posts. 

Drilling and inserting will be required ( a template will be supplied). If detailed specifications are required, please contact an Quick Value representative. 

MTS-I & II Economy Light with Tool Trolley

The MTS-FRAME tool trolley mounts to the economy light support brackets, ensure that you choose the part number that includes both the tool trolley and the light. Tool trolleys allow the operator to access air or electric tools from above the worksurface. The light fixtures, which the trolley attaches to, are ergonomically designed to aid the operator with the repetitive reaching of tools. The trolley provides free travel across the entire width of the worksurface. Use pneumatic or electrical tools. Additional sliding tool hangers are available as an option. Tool trollies are full length accessories, spanning the entire width of your chosen bench length. 

The MTS-FRAME frame economy light is UL Listed and accepts two (2) T8 tube lights (not included), 48” long light mounts anywhere along the vertical uprights of the MTS-FRAME frame structure. This light includes an on/off switch attached to an 8-ft power cord. The light includes a prismatic lens diffuser, with 100-110 foot candles of illumination at the worksurface (with nominal ambient light). The Electronic Ballast operates cooler and more efficiently (lower air conditioning costs) and is 10% more efficient than magnetic ballasts; 15-20% more efficient than standard electromagnetic ballasts. This lighting system operates above 20,000 Hz and eliminates 60 cycle hum and flicker, all while remaining environmentally safe. 

The light adjusts up and down along the slotted uprights, allowing you multiple height options depending on your specific need, as well as in and out for reach differences. The light angle tilts on the bracket connector axis for optimum light direction. This lights brackets are manufactured with heavy (12) gauge brackets with included hand knobs to lock light at correct angle. 

MTS-II Shelving

Multi-Task System utility shelves are manufactured with heavy gauge formed steel to provide off-the-worksurface storage; shelving formed as a steel pan. These shelves are 12” deep and include angle brackets that adjust from 0 – 17 degrees. Each set flush with the MTS uprights and include a shelf lip that acts as a parts cup rail. The brackets for these shelves are heavy (12) gauge steel and allow the shelf to slide into the MTS upright with secure positioning. 

The actual lengths for MTS-II shelving (remember that MTS-II has two slotted posts) are 48” bench have 43.5” long shelves, 60” bench have 55.5” long shelves and 72” benches have 67.5” long shelves. Each shelf featuring quick release hand lever brackets for easy angle adjustment with a load rating of 50 lbs. per shelf – based on overall frame capacity. Shelves are metal but to include ESD options; ensure that you have selected ESD if required for your application. 

MTS-II Multi-Bin Panel

IAC’s multi-bin panel for the MTS-II two post slotted frame are offered in either standard or ESD applications; these bin rails are 6” high and made with heavy (18) gauge uni-web panel and are mounted to heavy (14) gauge brackets; remember that MTS-II frames have two slotted posts, meaning your bin rail spans the full length of your bench. There are six rails per section, which are ideal for multiple bin storage. These MTS-II bin rails accept industry standard part bins and other rail options. These are ideal for stacking when a large number of bins are used. 

MTS-II Electrical Channel

The electrical channel for the MTS-II frame system is mounted to heavy (14) gauge brackets and can be positioned where your electrical access is needed most; at the worksurface, above or below shelves or anywhere along the uprights. Remember that the MTS-II frame is a two post slotted upright system, allowing you to have electrical channels spanning the entire width of the workbench. The channel includes an 8-ft molded power cord, 6 outlets, and a 15-amp circuit breaker; wired for 15-amp, 120-volt AC. This channel meets UL requirements and is ETL approved.

Reviews

No customer comments for the moment.

Write a review

IAC Hand Crank Height Adjustable Workbench 30”D x 60”W (930 Series with MTS-II)

IAC Hand Crank Height Adjustable Workbench 30”D x 60”W (930 Series with MTS-II)

The IAC  hand crank hydraulic adjustable height workstation (930 Series)Bundle 11 comes with IAC's heavy duty Multi-Task System II (MTS-II), a two (2) slotted post upright system, preconfigured with an overhead light, tool trolley, electrical channel, bin panel and utility shelf. The MTS-II offers endless configurations up and down the slotted upright posts and has a load capacity of 250 lbs. Adjust the overall height of your work bench with this systems hydraulic hand crank - with a 12-inch adjustment range, from 30" to 42". Choose the standard 1-1/4" thick laminate worksurface top (made from 1-3/16" commercial grade particle board) or upgrade to an ESD top for electronics work. This bench has a 1000 lbs. max load capacity, 500 lbs. load during adjustment and 750 lbs. capacity at the stations highest adjustment. Expand your IAC 930 workbench by adding additional shelves, drawers and cabinets, and CPU holder. All IAC products are manufactured and assembled in the USA.

This adjustable height bench legs are aluminum with a silver coating. Your color choice applied to the bench frame and beams. 

Write a review

Ask A Question About This Product

IAC Hand Crank Height Adjustable Workbench 30”D x 60”W (930 Series with MTS-II)

Enter your name
Enter your email
Your message