IAC Steel Workbench w/ Overhead Light & Utility Shelf 30-36" x 48-72"

The IAC Workmaster Steel Workbench with Overhead Light & Utility Shelf (Bundle 9) comes with IAC's heavy duty Multi-Task System II (MTS-II) preconfigured with an overhead light and utility shelf. The MTS-II offers endless configurations up and down the slotted upright posts and has a load capacity of 250 lbs. Adjust the overall height of your work bench on 6" telescoping adjustable legs,. Choose the standard 1-1/4" thick laminate worksurface top (made from 1-3/16" commercial grade particle board) or upgrade to an ESD top for electronics work. This bench has a 1500 lbs. load capacity. Expand your IAC Workmaster workbench by adding drawers, storage cabinet, electrical channel, footrest and CPU holder. All IAC products are manufactured and assembled in the USA.

More details

$1,000.35

-5%

$1,053.00

Add to wishlist

Buy as Shown, or Customize Further with Our Configurator Below!

Accessories Available in Configurator

  • Lock Option

Features

Fast ShipCall for current lead times – (800) 989-1422
Worksurface/Bench Top SpecificationsIAC 1-1/4” Total thickness constructed of 1-3/16” Commercial Grade Particle Board Core including 180° Rolled Front Edge and fully inserted for easy assembly and retrofit
Available in ESDYes
ESD Worksurface/Bench TopESD Properties are tested and results are logged at the manufacturer. ESD tops are shipped with 1 stainless steel ground bolt in the rear corner of the top and include a 10’ ground cord
Weight/Load CapacitySupports 1500 lbs. evenly distributed static load
Available Depth30 and 36 inches
Available Length48, 60 and 72 inches
Bench Top/Worksurface Height30 inches; with adjustment capabilities of 32, 34 and 36 inches – includes telescoping legs
Upright TypeHeavy Gauge Steel dual slotted posts, 1 inch increments
Number of UprightsTwo (left and right)
Upright Height48 inches (from worksurface to top of channel)
Light Fixture support Structure Available Length48 inches, 60 inches, 72 inches, 96 inches
Length of Light48 inches
Type of LightAccepts (2) T8 tube with prismatic diffuser (tubes not included)
Electrical Channel LengthMTS-II – 45.5 inches 48 inch bench, 57.5 inches 60 inch bench and 69.5 inches 72 inch bench
# of Outlets(8) 15 amp power outlets
Electrical Channel Mounts ToMTS-2 Uprights

More info

Features – More Info

Available Sizes: 30"D x 48"L --- 30"D x 60"L --- 30"D x 72"L --- 36"D x 72"L 

The Workmaster Workbench is ideal for almost any environment. Manufactured and designed by IAC Industries to meet a broad range of application needs. All IAC products are ergonomically designed (combining ergonomics and lean manufacturing standards) to ensure maximum worker safety, improved efficiency and greater productivity. Each Workmaster Workbench is adjustable with its telescoping legs – allowing for different height relevant to the operator and/or application.

Workmaster Frame and Bench Legs:

The Workmaster is comprised of two (2) “H” Frame legs on each side of the bench – two legs are connected with a beam offering extra support, creating the “H” frame. These legs include bolted on heavy-duty leg extenders, with floor glides, offering various worksurface/top heights. These adjustable legs offer a standard height of 30"; with adjustments to 32", 34", and 36" high – all 2” increments. The front and rear heavy-gauge top support beams allow for 1500 lbs. of weight when evenly distributed.

The worksurface is laminated over industrial-grade particle board to a full 1-1/4” thickness; metal threaded inserts are installed in a sealed underside for easy installation and long term strength and durability. Includes with this product is assembly hardware to be used with the pre-installed threaded inserts for easy assembly and high-strength connections. Each workbench has available options for ESD and includes dual ground studs and a 10-ft. ground cord. Topping this all off with an ergonomic 180 degree rolled front edge – standard on all IAC workbenches and workstations. Each ESD Worksurface is tested and results are logged at the factory/IAC Industries.

Workmaster Multi-Task Frame System II (MTS-II)

The MTS-II System is designed to enable operators easy configuration, and reconfiguration, of full-bench-length above the worksurface storage, tool management, lighting and electrical services. MTS-II consists of two (2) 48” high slotted vertical posts mounted to a support panel and bracket kit that is attached to the underside of the worksurface (this two post slotted system is unique to IAC Industries); dimensions are heavy (12) gauge double slotted, 2” wide x 1-7/8” deep slotted vertical posts. These slotted vertical posts are stabilized at their tops with a full length tie beam for enhanced rigidity.

These uprights are mounted using C-clamp bases, 3/16” steel plate, bolted to the underside of the worksurface with brackets which provide secure fastening to the worksurface; each positioned at each corner of the bench. These slotted vertical posts accept a wide variety of accessories such as shelves, electrical channels, and lighting and computer accessory swing arms. Each accessory can be positioned up and down the 48” high vertical upright at 1” increments. The maximum load capacity for the MTS frame is 250 lbs. with no more than 50 lbs. above the center of the slotted vertical posts. 

MTS-I & II Economy Light

The MTS-FRAME frame economy light is UL Listed and accepts two (2) T8 tube lights (not included), 48” long light mounts anywhere along the vertical uprights of the MTS-FRAME frame structure. This light includes an on/off switch attached to an 8-ft power cord. The light includes a prismatic lens diffuser, with 100-110 foot candles of illumination at the worksurface (with nominal ambient light). The Electronic Ballast operates cooler and more efficiently (lower air conditioning costs) and is 10% more efficient than magnetic ballasts; 15-20% more efficient than standard electromagnetic ballasts. This lighting system operates above 20,000 Hz and eliminates 60 cycle hum and flicker, all while remaining environmentally safe.

The light adjusts up and down along the slotted uprights, allowing you multiple height options depending on your specific need, as well as in and out for reach differences. The light angle tilts on the bracket connector axis for optimum light direction. This lights brackets are manufactured with heavy (12) gauge brackets with included hand knobs to lock light at correct angle.

You have the option to order a tool trolley to attach to the brackets of the light, tool trolley sold separately.

MTS-II Shelving:

Multi-Task System utility shelves are manufactured with heavy gauge formed steel to provide off-the-worksurface storage; shelving formed as a steel pan. These shelves are 12” deep and include angle brackets that adjust from 0 – 17 degrees. Each set flush with the MTS uprights and include a shelf lip that acts as a parts cup rail. The brackets for these shelves are heavy (12) gauge steel and allow the shelf to slide into the MTS upright with secure positioning.

The actual lengths for MTS-II shelving (remember that MTS-II has two slotted posts) are 48” bench have 43.5” long shelves, 60” bench have 55.5” long shelves and 72” benches have 67.5” long shelves. Each shelf featuring quick release hand lever brackets for easy angle adjustment with a load rating of 50 lbs. per shelf – based on overall frame capacity. Shelves are metal but to include ESD options; ensure that you have selected ESD if required for your application. 

Reviews

No customer comments for the moment.

Write a review

IAC Steel Workbench w/ Overhead Light & Utility Shelf 30-36" x 48-72"

IAC Steel Workbench w/ Overhead Light & Utility Shelf 30-36" x 48-72"

The IAC Workmaster Steel Workbench with Overhead Light & Utility Shelf (Bundle 9) comes with IAC's heavy duty Multi-Task System II (MTS-II) preconfigured with an overhead light and utility shelf. The MTS-II offers endless configurations up and down the slotted upright posts and has a load capacity of 250 lbs. Adjust the overall height of your work bench on 6" telescoping adjustable legs,. Choose the standard 1-1/4" thick laminate worksurface top (made from 1-3/16" commercial grade particle board) or upgrade to an ESD top for electronics work. This bench has a 1500 lbs. load capacity. Expand your IAC Workmaster workbench by adding drawers, storage cabinet, electrical channel, footrest and CPU holder. All IAC products are manufactured and assembled in the USA.

Write a review

Ask A Question About This Product

IAC Steel Workbench w/ Overhead Light & Utility Shelf 30-36" x 48-72"

Enter your name
Enter your email
Your message