IAC Industries Fast Shipping Reduced price! IAC D4 Industrial Workstation View larger

IAC D4 Industrial Workstation

IAC’s Dimension 4 Modular Workstation with optional ESD Top – Single Sided Starter Unit are available in 30”(D) x 60-72”(L) x 72”(H) with a load capacity of 750 lbs. Worksurface tops are 1-1/4” thick with 1-3/16” Commercial Grade Particle Board. These stations are built with modular technology and are versatile and adaptable to meet your needs for easy expansion and reconfiguration. 

More details

$1,612.15

-5%

$1,697.00

Add to wishlist

Buy as Shown, or Customize Further with Our Configurator Below!

Accessories Available in Configurator

Features

Fast ShipCall for current lead times – (800) 989-1422
Worksurface/Bench Top SpecificationsIAC 1-1/4” Total thickness constructed of 1-3/16” Commercial Grade Particle Board Core including 180° Rolled Front Edge and fully inserted for easy assembly and retrofit
Available in ESDYes
ESD Worksurface/Bench TopIAC ESD Properties are tested and results are logged at the manufacturer. ESD tops are shipped with 2 stainless steel ground bolts, 1 at each rear corner of the top and include a 10’ ground cord
Weight/Load CapacitySupports 750 lbs. evenly distributed static load
Available Depth30 inches
Available Length60 and 72 inches
Bench Top/Worksurface HeightAdjustable – Manually by way of uprights
Upright TypeUnique two-piece extruded aluminum construction with captive nutway
Number of UprightsTwo (left and right)
Upright Height72 inches (from floor to top of channel)
Starter UnitIncludes Two Aluminum Uprights – expand with D4 Adder Unit
CertificationsUL - Listed

More info

Dimension 4 workstations easily expand to meet your growing needs through IAC’s intelligent modular technology, which enables you to reconfigure your stations at any time. The basic D4 unit (Single Sided Starter Unit), which you are viewing now, can be used as a standalone configuration or combine with a D4 “adder” unit (Single Sided Adder Unit). The D4’s modular technology solves your application needs today while setting the foundation for future expansion.  

All IAC products are ergonomically designed (combining ergonomics and lean manufacturing standards) to ensure maximum worker safety, improved efficiency and greater productivity.  Each D4 station is fully adjustable, providing you with the ability to customize your station with footrests, shelving, worksurface height adjustments and other components for personal comfort and efficiency.

Dimension 4 Uprights:

The D4 frame has a unique two-piece extruded aluminum construction made of T5 Aluminum alloy with thick wall construction and heavy gauge connector brackets that provide rigid connections between upright extrusions. The uprights include a captive nutway that provides infinite adjustment points for accessories with milled nutway ports that provide easy assembly and accessory add-on at a later date. Each upright is securely bolted to 2" x 3" aluminum bases (foot) that include floor glides that provide workstation leveling adjustments; 12” deep uprights with a two piece construction which give this station flexibility and additional stability. The uprights come with a slide-in accent /trim strip which contrast color between the uprights and the bench, these trim panels are laminate. Plastic tops and end caps are included with the uprights to provide a finished appearance. There is a 1-3/4” internal clearance which opens enough room for hidden air, data cables and other utilities that are common for vertical uprights. 

Worksurface Tops:

D4 Tops include lengths of 60" and/or 72" with a standard depth of 30”. Each bench configuration will support 750 lbs. when evenly distributed. The overall bench length for this category is approximately 2” longer than the worksurface top; this is due to the upright width. All D4 tops are standard 1-1/4" worksurface thickness using 1-3/16" commercial grade particle board and postform grade melamine plastic laminate that is applied under pressure; 180° rolled front edge is standard. Important for you to note is that these worksurfaces come standard with pre-inserted threads that provide strength, durability and easy assembly and future retrofit.

Frame Assembly:

Single sided stations have a heavy Gauge 13" high modesty panel that attaches to each upright; this provides rigid and square foundation for the bench. Each configuration has a pair of heavy gauge formed steel worksurface top brackets that combine with two extruded aluminum worksurface support "hat sections”; these hat section providing lateral support and the future addition of suspended drawers and cabinets along with other accessories. The captive square head bolt in hat section allows drawers to be mounted anywhere along the hat section. The frame color matches paint selection for the uprights

Reviews

No customer comments for the moment.

Write a review

IAC D4 Industrial Workstation

IAC D4 Industrial Workstation

IAC’s Dimension 4 Modular Workstation with optional ESD Top – Single Sided Starter Unit are available in 30”(D) x 60-72”(L) x 72”(H) with a load capacity of 750 lbs. Worksurface tops are 1-1/4” thick with 1-3/16” Commercial Grade Particle Board. These stations are built with modular technology and are versatile and adaptable to meet your needs for easy expansion and reconfiguration. 

Write a review

Ask A Question About This Product

IAC D4 Industrial Workstation

Enter your name
Enter your email
Your message