IAC D4 - Single Sided Add-on Unit - 30”D x 60-72”L x 72”H
search
IAC Industries
Fast Ship
  • IAC D4 - Single Sided Add-on Unit - 30”D x 60-72”L x 72”H

IAC D4 - Single Sided Add-on Unit - 30”D x 60-72”L x 72”H

QS-2001044

IAC’s Dimension 4 Modular Workstation with optional ESD Top – Single Sided Adder Unit are available in 30”(D) x 60-72”(L) x 72”(H) with a load capacity of 750 lbs. Worksurface tops are 1-1/4” thick with 1-3/16” Commercial Grade Particle Board. These stations are built with modular technology and are versatile and adaptable to meet your needs for easy expansion and reconfiguration. The Adder Stations first need to attach to a Starter and this can be used with additional Adders. 

Print

$1,347.00
Quantity

Laminate Standard
Workstation Length 60"

Add to wishlist

Buy as Shown, or Customize Further with Our Configurator Below!

Accessories Available in Configurator

Dimension 4 Uprights:

The D4 frame has a unique two-piece extruded aluminum construction made of T5 Aluminum alloy with thick wall construction and heavy gauge connector brackets that provide rigid connections between upright extrusions. The uprights include a captive nutway that provides infinite adjustment points for accessories with milled nutway ports that provide easy assembly and accessory add-on at a later date. Each upright is securely bolted to 2" x 3" aluminum bases (foot) that include floor glides that provide workstation leveling adjustments; 12” deep uprights with a two piece construction which give this station flexibility and additional stability. The uprights come with a slide-in accent /trim strip which contrast color between the uprights and the bench, these trim panels are laminate. Plastic tops and end caps are included with the uprights to provide a finished appearance. There is a 1-3/4” internal clearance which opens enough room for hidden air, data cables and other utilities that are common for vertical uprights.

Worksurface Tops:

D4 Tops include lengths of 60" and/or 72" with a standard depth of 30”. Each bench configuration will support 750 lbs. when evenly distributed. The overall bench length for this category is approximately 2” longer than the worksurface top; this is due to the upright width. All D4 tops are standard 1-1/4" worksurface thickness using 1-3/16" commercial grade particle board and postform grade melamine plastic laminate that is applied under pressure; 180° rolled front edge is standard. Important for you to note is that these worksurfaces come standard with pre-inserted threads that provide strength, durability and easy assembly and future retrofit.

Frame Assembly:

Single Sided Adder stations have a heavy Gauge 13" high modesty panel that attaches to each upright; this provides rigid and square foundation for the bench. Each configuration has a pair of heavy gauge formed steel worksurface top brackets that combine with two extruded aluminum worksurface support "hat sections”; these hat section providing lateral support and the future addition of suspended drawers and cabinets along with other accessories. The captive square head bolt in hat section allows drawers to be mounted anywhere along the hat section. The frame color matches paint selection for the uprights

QS-2001044

Data sheet

Configurator dimension-4
Configuration Preset qs-2001044
Fast Ship Call for current lead times – (800) 989-1422
Worksurface/Bench Top Specifications IAC 1-1/4” Total thickness constructed of 1-3/16” Commercial Grade Particle Board Core including 180° Rolled Front Edge and fully inserted for easy assembly and retrofit
Available in ESD Yes
ESD Worksurface/Bench Top IAC ESD Properties are tested and results are logged at the manufacturer. ESD tops are shipped with 2 stainless steel ground bolts, 1 at each rear corner of the top and include a 10’ ground cord
Weight/Load Capacity Supports 750 lbs. evenly distributed static load
Available Depth 30 inches
Available Length 60 and 72 inches
Bench Top/Worksurface Height Adjustable – Manually by way of uprights
Upright Type Unique two-piece extruded aluminum construction with captive nutway
Number of Uprights One
Upright Height 72 inches (from floor to top of channel)
Adder Unit Includes One Aluminum Upright – Attaches to D4 Starter or Adder Unit
New